A
-
AA2024 aluminum
Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
-
Abrasive Resistance
The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
-
Absorber Layer
Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
-
AC electrophoretic deposition
Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
-
Acetone
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Activated carbon
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Additive Manufacturing
Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
-
Adsorption and self
Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
-
Agricultural waste
Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
-
Air Plasma Spray
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
-
Air plasma spraying (APS)
Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
-
Al
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
Al3Ni Intermetallic Compound
Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
-
Al–4%TiC
Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
-
Al-ion batteries
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
-
Alkaline Concrete
Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
-
Alkaline fluoride salts
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
-
Alkanes
Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
-
Alloy
Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
-
Alumina
Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
-
Alumina
Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
-
Alumina matrix
Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
-
Alumina refractory castable
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
-
Alumina scaffold
Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
-
Alumina-zirconia composites
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
-
Alumina-Zirconia-Mullite
The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
-
Aluminide Coating
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Aluminum
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Aluminum Alloy
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
Aluminum Alloy
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
-
Aluminum alloys
Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
-
Aluminum and Graphite
The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
-
Aluminum Isopropoxide
Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
-
Aluminum Matrix Composites
Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
-
Aluminum nitride
Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
-
Ammonia
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Amorphous AlPO4
Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
-
Amorphous aluminosilicate phase
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
-
Amorphous silica
Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
-
AMZ composites
The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
-
Anode
The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
-
Anodized Titanium Dioxide
Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
-
Anodizing
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
Anterior cruciate ligament
Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
-
Antibacterial property
Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
-
Antifouling
Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
-
Antimicrobial coatings
Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
-
Antireflection
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
-
Aqueous electrolyte
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
-
Atomic force microscopy
Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
B
-
BaF2
Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
-
Ball milling
Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
-
Ball milling
An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
-
Band gap
Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
-
Band gap
Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
-
Bandgap
Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
-
Band gap engineering
Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
-
Barium aluminosilicate
Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
-
Barium Fluoride
An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
-
Barium titanate
The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
-
Battery
Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
-
Bearing Area
Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
-
Bearing Area
Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
-
Bearing area percentage
Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
-
BET
Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
-
Bi2O3
Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
-
Bioabsorbable Screws Mechanical Properties
Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
-
Bioactive
Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
-
Bioactive
Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
-
Bioactive Glass
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
-
Bioactive Glass
Fabrication and Preliminary Characterization of Tissue Engineering Scaffolds Based on Alumina/Bioactive Glass [Volume 7, Issue 4, 2021, Pages 10-19]
-
Bioactive glass nanoparticles
In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
-
Bioactivity
Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
-
Bioactivity
In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
-
Biocompatibility
Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
-
Biocompatibility
Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
-
Biomaterials
Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
-
Biomedical applications
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
Bioscrews
In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
-
Bismuth borate glasses
Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
-
Bismuth ferrite
Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
-
BK7 glass
Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
-
BMIm[OH]
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
Bond strength
Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
-
Bone
Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
-
Bone cements
Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
-
Bone tissue engineering
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
-
Bone tissue engineering scaffold
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Borosilicate glasses
Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
C
-
CaF2 nanocrystals
Luminescence Properties of Oxyfluoride Glass and Glass Ceramic Doped with Y3 + Ions [Volume 1, Issue 1, 2015, Pages 6-10]
-
Calcination kinetics
Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
-
Calcium phosphate cement
Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
-
Calcium phosphate glass
Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
-
Calcium titanate
Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
-
Canine Animal Model
In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
-
Capacitance
Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
-
Carbon Fibers
Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
-
Carbon Nanotube
Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
-
Carbon nanotubes
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
-
Catalyst
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
Catalyst
Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
-
Catalyst
TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
-
Cathode Materials
Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
-
Cathode Materials
Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
-
Cathodic electrodeposition
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
-
CDS
Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
-
CdTe
Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
-
CdWO4
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
Ce dopant
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
Cemented carbide
Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
-
Cementitious adhesive
Composition, Properties, and Standards for Cementitious Ceramic Tile Adhesive: A Review [Volume 9, Issue 1, 2023, Pages 15-27]
-
Cementitious matrix composite
Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
-
Centrifuge casting
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
CeO2
Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
-
Ceramic
Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
-
Ceramic Composite
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Ceramic core
Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
-
Ceramic electrode
TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
-
Ceramic materials
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
-
Ceramic/ metals composite
Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
-
Chalcogenide
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
Chalcogenide glass
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
-
Characterization
Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
-
Chemical Enhanced Oil Recovery (C-EOR)
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Chemical etching
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
-
Chemical properties
Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
-
Chemical stability
Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
-
Chemical Vapor Deposition
Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
-
Chemical Vapor Deposition
Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
-
Chloride ion
Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
-
Cleaning
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
-
CNT
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
-
CO
Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
-
Coating Cauliflower
Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
-
Cobalt ferrite
An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
-
Cobalt oxide nanoparticles
ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
-
CoFe2O4
Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
-
Cold isostatic pressing
Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
-
Cold isostatic pressing
Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
-
Combined annual growth rate
The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
-
Combustion
Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
-
Composite
Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
-
Composite
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
Composite
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
-
Composite
The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
-
Composite
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
-
Composite
Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
-
Composites
Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
-
Composites
Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
-
Compressability
Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
-
Compressibility
Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
-
Concentration ratios
Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
-
Concrete
Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
-
Construction and demolition waste
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
-
Copper hexacyanoferrate
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
-
Copper oxide
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
Cordierite
Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
-
Cordierite Glass
Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
-
Corrosion behavior
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
Corrosion Resistance
The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
-
Cr
Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
-
Cristobalite
Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
-
Cristobalite
Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
-
Crystal Growth
Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
-
Crystallization
Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
-
Crystallization
Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
-
Crystallization Mechanism
Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
-
CTAB
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
-
Cubical crystal structure
Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
-
Cu-Co Films
Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
-
CuInAlSe2
Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
-
CuO/ZnO composite
Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
-
Current Density
Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
-
Current Density
The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
-
CuS
Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
-
Cyclic oxidation
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Cyclic Voltammetry
Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
-
Cytotoxicity
In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
D
-
Decoration
Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
-
Defect
The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
-
Degradability, Swelling
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Densification
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
-
Densification
Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
-
Densification
Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
-
Densification
The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
-
Density
Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
-
Density functional theory
Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
-
Density of states
Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
-
Density of states
Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
-
Depth profile
Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
-
Desalination
Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
-
Design expert
Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
-
Design for Disassembly (DfD) technique
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
-
DFT
Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
-
Diamond/WC-Co composite
The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
-
Dielectric
Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
-
Dielectric
Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
-
Dielectric Constant
Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
-
Dielectric properties
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Dielectric properties
Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
-
Diffusion
Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
-
Diffusion
Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
-
Diffusion welding
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
-
Dimethylformamide
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Dispersant
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
-
DLP
Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
-
DNA
A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
-
Dolapix
Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
-
Doping
Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
-
Doping
The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
-
Doping
Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
-
Doping
Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
-
Double heterojunction bipolar transistor
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
Double Layer
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
Dry Reforming
TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
-
DSC
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
DSC analysis
Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
-
Durability
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
E
-
ECV
Implementation of EIS for dopant profile analysis in n-type silicon [Volume 3, Issue 1, 2017, Pages 16-20]
-
Effective parameter
Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
-
Egyptian green
Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
-
Elecrodeposition
Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
-
Electrical and Optical Properties
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
-
Electrical Properties
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
Electrical resistivity
Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method [Volume 2, Issue 1, 2016, Pages 1-4]
-
Electrochemical deposition
Binder-free copper hexacyanoferrate electrode prepared by pulse galvanostatic electrochemical deposition for aqueous-based Al-ion batteries [Volume 4, Issue 2, 2018, Pages 27-31]
-
Electrochemical Etch Tuning
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
-
Electrochemistry
Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
-
Electrochemistry
Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
-
Electro-deoxidation
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Electrodeposition
Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
-
Electrodeposition
Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
-
Electroless
Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
-
Electrolyte
The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
-
Electromagnetic stir casting
Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
-
Electron Beam Evaporation
Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
-
Electron Microscopy
Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
-
Electrophoretic deposition
Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
-
Electrospinning
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
-
Emission
Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
-
Emission
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
Environment
Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
-
Environmental Impact
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
-
Epitaxial growth
Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
-
Etching
Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
-
Etching rate
Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
-
Ethanol
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
-
Ethanol
Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
-
Ethylene glycol
An Investigation on Milling Method in Reduction of Magnesium Nano-Powder Particles Based on Sustaining Chemical Activity [Volume 4, Issue 1, 2018, Pages 12-17]
-
Experimental analysis
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
F
-
FEM
Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
-
FEM
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
-
Ferroelectric KNN
Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
-
Ferroelectrics
The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
-
Ferromagnetic BFO
Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
-
Fe-TiC/Al2O3 composites
The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
-
Fiber metal laminates
Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
-
Fibers
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
-
Filling fraction
Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
-
Filling fraction
Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
-
Finite element method
Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
-
Finite element method
Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
-
Flexible and printed electronics
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
Flowability
Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
-
Fluorapatite
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Fluorapatite
Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
-
Fluorapatite
Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
-
Flutter in composites
Investigating the Phenomenon of Flutter as well as the Mechanical and Microstructural Properties of Layered Composite of Aluminum Sheet with An Epoxy Matrix Reinforced with Carbon Fibers [Volume 9, Issue 2, 2023, Pages 36-44]
-
Fly ash (FA)
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
-
Foam
Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
-
Forsterite
Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
-
Fractal dimensions
Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
-
Fractal dimensions
Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
-
Fractal dimensions
Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
-
Fracture toughness
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
-
Fracture toughness
Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
-
Fracture toughness
Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
-
Fracture toughness
Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
-
Fracture toughness
Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
-
Freeze casting
Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
-
FT
Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
-
FT
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
Functionally graded thermal barrier coating
Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
-
Functionally Graded Thermal Barrier Coating (FGTBC)
Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
-
Fused Silica
Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
G
-
Gallium
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
Gas turbine
The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
-
GDC composite
Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
-
GdMnO3 Ceramics
The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
-
Ge
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
-
Gelatin
Investigation of Macroporous Calcium Phosphate Cement Obtained by Foamed Gelatin Polymer [Volume 2, Issue 4, 2016, Pages 18-24]
-
Gelatin
Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
-
Gel-Casting
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
-
Gene Therapy
A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
-
GeSe
Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
-
Glass-ceramic
Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
-
Glass-ceramic
Compressibility and Foaming behavior of steel slag/waste glass compositesby particle size distribution and foam agents [Volume 5, Issue 1, 2019, Pages 23-30]
-
Glass-ceramic
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
Glass-ceramic
Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
-
Glass ionomer
Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
-
Glass Sealant
Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
-
GO optical band gap
Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
-
GO-silane
Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
-
Graphene Oxide Nanoplatelet
Chloride Ingress into High-Performance Concrete Containing Graphene Oxide Nanoplatelets and Ground Granulated Blast Furnace Slag under Different Conditions of Water Pressure and Temperature [Volume 7, Issue 3, 2021, Pages 29-48]
-
Graphene Oxide thin film
Fabrication of Graphene Oxide Thin Films on Transparent Substrate via a Low-Voltage Electrodeposion Technique [Volume 1, Issue 2, 2015, Pages 6-10]
-
Graphite
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Green synthesis
Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
-
Growth Temperature
Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
H
-
H2O
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
-
H2PtCl6.6H2O
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
Hardness
Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
-
Hardness
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
-
Hardness
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Hardness
Microstructure, mechanical and thermal properties of chalcogenide glasses and glass-ceramics based on Se-As-Ge system nucleated by Sn [Volume 5, Issue 1, 2019, Pages 15-22]
-
Hardness
Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
-
Hard porcelain
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
-
Hardystonite
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Heat treatment
Enhancing the bioactivity of a calcium phosphate glass-ceramic with controlled heat treatment [Volume 3, Issue 2, 2017, Pages 31-37]
-
Heat treatment
Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
-
Heterogeneous nucleation
Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
-
Heterojunction
Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
-
HF
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
-
HfB2
Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
-
HfB2-SiC-Graphite Composite
Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
-
HfB2-SiC-Nd2O3 Composite
Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
-
HF/H2O2 ratio
Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
-
High Energy ball milling
Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
-
Hot pressing
Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
-
HVOF
Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
-
HVOF
Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
-
Hydrothermal
ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
-
Hydrothermal method
Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
-
Hydrothermal stability
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Hydroxide
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
-
Hydroxide precursors
Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
-
Hydroxyapatite
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
-
Hydroxyapatite
Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
-
Hydroxyapatite
Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
-
Hydroxyapatite
Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
-
Hydroxyapatite
Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
-
Hydroxyapatite
The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
-
Hyperthermia
An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
I
-
Ilmenite
The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
-
Ilmenite
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Immiscible Metals
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Implant
Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
-
In
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
Industrial policy
Evaluation of Industrial Policies on the Boom of Domestic Production of Advanced Ceramics Based on an Approach to Environmental Protection [Volume 9, Issue 1, 2023, Pages 38-45]
-
Injectable composite
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Injection Molding
The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
-
Interface characteristics
Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
-
Interfacial Polymerization
Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
-
Intermetallics
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
-
In vitro Bioactivity
Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
-
Ionic Conductivity
The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
-
Ionic Liquid
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
Ion-implantation
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
IR
Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
-
IR
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
IR transmittance
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
-
ITO thin films
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
K
-
Kinetic
Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
-
Kinetic parameters
Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
-
Kinetics
Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
-
KNN
Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
-
KNN
Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
L
-
La2Ce2O7
Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
-
Lead free piezoceramics
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
Li2FeSiO4
Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
-
Li-ion batteries
Effect of fluorine doping on LiCoO2 cathode material: a DFT study [(Articles in Press)]
-
LiNO3 electrolyte
Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
-
Liquid phase sintering
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
-
Liquid-phase sintering
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
-
Li Solid state electrolyte
The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
-
Lithium
Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
-
Lithium
Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
-
Lithium-ion
Theoretical Assessment of the First Cycle Transition, Structural Stability and Electrochemical Properties of Li2FeSiO4 as a Cathode Material for Li-ion Battery [Volume 3, Issue 4, 2017, Pages 25-33]
-
Lithium Ion Batteries
Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
-
Lithium-ion battery
Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
-
Lithium-ion battery
Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
-
Low Voltage
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
LTSOFC
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
Luminescence Properties
Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
M
-
Macroporous
Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
-
Magnesia
Crystallization Behavior and Mechanical Properties of In-situ Alumina-Zirconia Composite Bodies [Volume 4, Issue 3-4, 2018, Pages 36-42]
-
Magnesium
Effects of Time, Temperature and Precursor on Solid State Synthesis of α-TCP [Volume 1, Issue 1, 2015, Pages 36-39]
-
Magnesium
The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
-
Magnesium alloy
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
-
Magnesium titanate
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
-
Magnetic hydroxyapatite
Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
-
Magnetic nanoparticle
Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
-
Magnetic nanoparticles
Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
-
Magnetic nanoparticles
Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
-
Magnetic properties
Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
-
Magnetic properties
Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
-
Magnetic properties
The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
-
Magnetoviscous effect
Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
-
Manganite oxides
Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
-
MASHS
Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
-
Mechanical activation
Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
-
Mechanical activation
Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
-
Mechanical activation
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
Mechanical milling
Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
-
Mechanical properties
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
-
Mechanical properties
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Mechanical properties
Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
-
Mechanical properties
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
-
Mechanical properties
Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
-
Mechanical properties
Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
-
Mechanical properties
Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
-
Mechanical properties
Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
-
Mechanical properties
Alkali-Activated Slag Cement and Concrete: A Review [Volume 7, Issue 4, 2021, Pages 1-9]
-
Mechanical properties
Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
-
Mechanical properties
Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
-
Mechanical properties
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
-
Mechanical Property
Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
-
Mechanism
Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
-
Mesoporous silica
Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
-
Metal organic framework
Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
-
Methylene blue
Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
-
Mg
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
MgAl2O4 Spinel
In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
-
MgO
The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
-
MgTiO3
Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
-
Micro-battery
Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
-
Micrograph
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
-
Micron-sized SiC
Role of Etching Process of SiC Particles on the Microstructure and Mechanical Properties of Stir Casted Al357−SiC Metal matrix Composite [Volume 7, Issue 2, 2021, Pages 10-15]
-
Microstructure
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
Microstructure
Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
-
Microstructure
Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
-
Microstructure
Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
-
Microstructure
Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
-
Microstructure
Experimental and Numerical Evaluation of Diffusion Welding of 7075 Aluminum and AZ31 Magnesium Alloys [Volume 7, Issue 1, 2021, Pages 25-34]
-
Microstructure
Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
-
Microstructure of sedimentation layer
Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
-
Microwave-assisted solution combustion synthesis
Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
-
Microwave dielectric
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
-
Microwave sintering
Effect of Milling Time and Microwave Sintering on Microhardness and Electrical Properties of Nano and Micro Structured Cordierite [Volume 1, Issue 1, 2015, Pages 1-5]
-
Microwave sintering
Effect of ball milling on reactive microwave sintering of MgO-TiO2 System [Volume 2, Issue 3, 2016, Pages 25-28]
-
Milling parameters
Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
-
Mixed alkali effect
Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
-
Mn-Containing Glasses
In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
-
Modifier
Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
-
Molar Ratio
The Effect of Raw Material Ratio on the Formation Mechanism of Fe-TiC/Al2O3 Composite [Volume 3, Issue 2, 2017, Pages 25-30]
-
Molar Ratio
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Molecular Dynamics Simulation
Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
-
MoS2
Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
-
Multiferroic composites
Study of Dielectric Properties of Lead-Free Multiferroic KNN/22.5 BaFe12O19 Composites [Volume 7, Issue 3, 2021, Pages 23-28]
-
Multiferroic Materials
The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
-
Multi-layer polymer
Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
N
-
Nafion
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
-
Nano
Fabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions [Volume 1, Issue 2, 2015, Pages 24-28]
-
Nano
Optimization of the nanoporous silicon structures by magnesiothermic reduction of the as-synthesized silica [Volume 2, Issue 1, 2016, Pages 32-37]
-
Nano
Effect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite [Volume 2, Issue 3, 2016, Pages 12-16]
-
Nano
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
Nano-alloy
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Nano and micron WO3
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
Nano Biocoatings
In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
-
Nanocomposite
Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
-
Nanocomposite
Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
-
Nanocomposite
Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
-
Nanocomposite
Synthesis of FAp, Forsterite, and FAp/Forsterite Nanocomposites by Sol-gel Method [Volume 6, Issue 2, 2020, Pages 35-42]
-
Nanocomposite
Mechanical Properties and Biocompatibility of Hydroxyapatite/Manganese Dioxide/Palladium Nanocomposite Scaffolds Filled by Natural Chitosan [Volume 7, Issue 3, 2021, Pages 1-9]
-
Nanocomposite
Antibacterial Activity of Hydrophobic TaN-Ag Nanocomposite Thin Film [Volume 7, Issue 3, 2021, Pages 10-16]
-
Nanocomposite
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
Nanocomposite
Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
-
Nanocomposite
Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
-
Nanocomposites
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Nanohybrid
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Nano-hydroxyapatite
Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
-
Nano indentation
Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
-
Nano-indentation
Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
-
Nanoindentation
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
-
Nanoindentation
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
-
Nanoparticle
Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
-
Nanoparticle
Synthesis and Characterization of Palladium Impregnated MIL-53(Fe) as Cathode Material of Supercapacitor [Volume 7, Issue 1, 2021, Pages 11-17]
-
Nanoparticles
Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
-
Nanoparticles
A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
-
Nanoparticles
Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
-
Nanoporous
Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
-
Nanoporous
Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
-
Nanoporous Membrane
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Nano Sintering Additives
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Nano SiO2
Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
-
Nano-Size
Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
-
Nanosized Materials
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
Nanosphere
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Nanostructure
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
-
Nanostructure
Effect of Heat Treatment on Grain Growth of Magnetic Nanocrystalline Hydroxyapatite Powder [Volume 6, Issue 4, 2020, Pages 15-21]
-
Nano-structured hard-metal
Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
-
Nanostructured materials
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
Nanostructures
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
-
Nanostructure silica
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Nano-TiO2
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
-
Nanotubes
Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
-
Nanotubes lateral size
Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
-
NASICON
Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
-
Nb2O5
Nb2O5 Nanoparticles Synthesis by Chemical Surfactant-Free Methods: ltrasonic Assisted Approach [Volume 2, Issue 4, 2016, Pages 13-17]
-
Ni
Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
-
Ni
Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
-
Nickel ferrite
Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
-
Ni/GDC20 Anode
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
Niobium pentoxide
Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
-
Ni-P-GO Nanocomposite
Investigation of Microstructure, Hardness, and Corrosion Resistance of Ni-P-GO Electroless Nanocomposite Coating on AZ31D Alloy Surface [Volume 6, Issue 3, 2020, Pages 55-62]
-
Nitenpyram
Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
-
NiTi
Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
-
Numerical
Modeling and Experimental Study of Pyroplastic Deformation for Ceramic Materials during Liquid Phase Sintering Process [Volume 3, Issue 2, 2017, Pages 14-24]
-
Numerical method
Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
O
-
Optical band gap
Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses [Volume 3, Issue 3, 2017, Pages 1-7]
-
Optical band gap
Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
-
Optical band gap
Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
-
Optical Density
Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
-
Optical Density
Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
-
Optical Glass
An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
-
Optical Glass
Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
-
Optical properties
Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2 [Volume 2, Issue 3, 2016, Pages 17-24]
-
Optical properties
Correlation Between Surface Morphology and Optical Properties of Quasi-Columnar Porous Silicon Nanostructures [Volume 2, Issue 4, 2016, Pages 44-49]
-
Optical properties
Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
-
Optical properties
Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
-
Optical response
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
Organosol Synthesis
The Room-Temperature Sodium-Free Organosol Precipitation of Barium Titanate Nanocrystals [Volume 5, Issue 2, 2019, Pages 12-18]
-
ORR
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
-
Osteoinduction
Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
-
Oxidation behavior
Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
-
Oxidation Resistance
Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
-
Oxide films
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
-
Oxide Precursor
Electro-Synthesis of Cu-Nb Nanocomposites; Toward Novel Alloying of Immiscible Bimetals [Volume 4, Issue 1, 2018, Pages 32-39]
-
Oxyfluoride
An Investigation into the Effects of Composition and BaF2 Content on the Structure and Crystallization Behavior of SiO2-Al2O3-K2O-BaF2 Oxyfluoride Glasses [Volume 6, Issue 1, 2020, Pages 16-21]
-
Oxyfluoride
Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
-
Oxy-Fluoride
Optical Properties and Crystallization Behavior of SiO2-Al2O3-BaO-BaF2 Glasses Containing Different Amounts of Bi2O3 [Volume 7, Issue 2, 2021, Pages 34-43]
-
Oxyfluoride glass
The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
-
Oxyfluoride Glass-Ceramics
Investigating the Kinetic Parameters of SiO2-Al2O3-CaO-CaF2-K2O Oxyfluoride Glass [Volume 6, Issue 4, 2020, Pages 1-7]
P
-
PACVD
Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
-
Palladium
Partial acetylene hydrogenation over commercial Pd-Ag/α-Al2O3 catalyst promoted by ionic liquid [Volume 2, Issue 3, 2016, Pages 29-33]
-
PDLLA/PCL
In Vivo Assessments of the Poly(d/l)lactide/Polycaprolactone/Bioactive Glass Nanocomposites for Bioscrews Application [Volume 7, Issue 3, 2021, Pages 17-22]
-
PEMFC
Investigating the Timing Effect of the Nafion Addition to the Bimetallic (Pd-Pt) Catalyst in Proton-Exchange Membrane Fuel Cell Cathode [Volume 5, Issue 2, 2019, Pages 19-25]
-
Perovskite
Determining the Optimal Conditions for Calcium Titanate Nanostructures Synthesized by Mechanical Alloying Method [Volume 1, Issue 1, 2015, Pages 11-16]
-
Perovskite
Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
-
Perovskite oxide
Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
-
Phase Characterization
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
-
Phase composition
The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
-
Phase evolution
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
-
Phase separation
Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
-
Phase stability
A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
-
Phase transformation
Influence of Calcination Kinetics Parameters on Synthesis of KNN Piezoelectric Ceramics [Volume 2, Issue 2, 2016, Pages 37-47]
-
Phase transformation
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Phase transformation phase stability
Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
-
Phosphate-based glass
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Phosphate-based glass
Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
-
Phosphate Glass-ceramics
Determination of the Nucleation and Crystallization Parameters for Making Nanoporous Titanium Phosphate Glass-ceramics [Volume 3, Issue 3, 2017, Pages 26-31]
-
Phosphate Glass-ceramics
Addition of Alumina to Nanoporous Calcium Titanium Phosphate Glass-Ceramics and its Effects on Crystallization Behavior [Volume 6, Issue 1, 2020, Pages 36-42]
-
Phosphors
Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
-
Photocatalysis
Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
-
Photocatalytic
ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
-
Photocatalytic activity
Enhanced Phtocatalytic Activity of α-Fe2O3 Nanoparticles Using 2D MoS2 Nanosheets [Volume 3, Issue 4, 2017, Pages 34-40]
-
Photocatalytic activity
Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
-
Photosensitizer
Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
-
Pickering emulsion
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Piezoceramic
Dielectric and Mechanical Properties of BZT-xBCT Piezoceramics Modified by Nano SiO2 Additive [Volume 6, Issue 2, 2020, Pages 24-29]
-
Piezocomposite
Investigation on the band gap of centered square phononic crystals [(Articles in Press)]
-
Piezoelectric
Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
-
Piezoelectric Properties
Studying the Effects of Nano Sintering Additives on Microstructure and Electrical Properties of Potassium-Sodium Niobate Piezoceramics [Volume 4, Issue 2, 2018, Pages 7-15]
-
Plasma electrolytic oxidation
Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
-
Plasma spray
Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
-
Plasma spray
Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
-
PLASMA SPRAY FORMING
Nanoindentation-Based Mechanical Properties Evaluation of Nano-Structure and Composite Plasma Spray Formed Ceramic Nozzles [Volume 9, Issue 2, 2023, Pages 24-35]
-
Plasma spraying
In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
-
Platinum Infiltration
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
PMN-PT
Improvement of the Effective Parameters of 1-3 Piezocomposite Using Multi-Layer Polymer and PMN-PT Relaxor Single Crystal [Volume 8, Issue 2, 2022, Pages 61-72]
-
Pore structure
Preparation of aliened porous Ni-GDC nano composite by freeze-casting process [Volume 3, Issue 1, 2017, Pages 10-15]
-
Porogen
Synthesis of a Macroporous Glass-Ceramic Scaffold Containing Fluorapatite Crystalline Phase for Bone Substitutes [Volume 6, Issue 3, 2020, Pages 47-54]
-
Porous Ceramics
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
-
Porous Network
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Potassium sodium niobate
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
Powder Metallurgy
Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
-
Powder Metallurgy
Microstructure, Densification, and Compressive Properties of Al-CNT Metal Matrix Composites Fabricated by Flake Powder Metallurgy and Conventional Sintering Process [Volume 8, Issue 2, 2022, Pages 27-33]
-
Powder processing
Evaluation of microstructure and mechanical properties of bulk nanostructured Ti5Si3 and Ti5Si3-Al2O3 nanocomposite [Volume 3, Issue 1, 2017, Pages 1-5]
-
Precipitation
Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
-
Pressureless sintering
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Pressureless sintering
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
-
Pseudocapacitance
Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
-
Pseudomorphism
Pseudomorphic Reaction: A New Approach to Produce Bulk Mesoporous Silica as Catalyst Support in Methane Reforming [Volume 3, Issue 4, 2017, Pages 13-20]
-
Pt-Nanoparticles
Nanostructuring Platinum Nanoparticles on Ni/Ce0.8Gd0.2O2-δ Anode for Low Temperature Solid Oxide Fuel Cell via Single-step Infiltration: A Case Study [Volume 4, Issue 1, 2018, Pages 45-51]
-
Pull out strength
Strength and Toughness of Reinforced Concrete with Coated Steel Fibers [Volume 5, Issue 1, 2019, Pages 9-14]
-
Pulse Electroplating
Heat Treatment of Pulsed Electroplated Nickel Deposited on AA2024 Aluminum [Volume 7, Issue 1, 2021, Pages 46-51]
Q
-
Quantitative phase analysis
Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
R
-
Raman spectroscopy
Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
-
Raman spectroscopy
Effect of temperature on low pressure chemical vapor deposition of graphene [Volume 8, Issue 1, 2022, Pages 36-43]
-
Rare earth
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
Rare earth element
Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
-
Rare-earth Elements
An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
-
Rate capability
Evaluating Electrical Properties, Band Gaps and Rate Capability of Li2MSiO4 (M= Mn, Fe, Co, Ni) Cathode Materials Using DOS Diagrams [Volume 5, Issue 3, 2019, Pages 30-35]
-
Reaction sequence
Formation of Two Types of Alumina/Intermetallic Composites based on the Reaction of Ilmenite and Aluminum [Volume 4, Issue 1, 2018, Pages 24-31]
-
Reactive Spark Plasma Sintering
Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
-
Reactor
TiO2-Coated Electrode for Plasma Dry Reformer for Synthesis Gas Production in Ambient Conditions [Volume 6, Issue 4, 2020, Pages 22-27]
-
Reconstruction
Bioabsorbable Screws for Anterior Cruciate Ligament Reconstruction Surgery: A Review [Volume 6, Issue 3, 2020, Pages 31-46]
-
Reflection properties
Investigation of HF/H2O2 Concentration Effect on Structural and Antireflection Properties of Porous Silicon Prepared by Metal-Assisted Chemical Etching Process for Photovoltaic Applications [Volume 2, Issue 4, 2016, Pages 25-31]
-
Reinforcement
Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
-
Relative Density
An investigation on Mechanical Properties of Apatite-Wollastonite-Diopside Glass-Ceramics Composites [Volume 4, Issue 2, 2018, Pages 1-6]
-
Rene-80
Cyclic oxidation behavior of uncoated and aluminum-rich nickel aluminide coated Rene-80 superalloy [Volume 4, Issue 3-4, 2018, Pages 1-7]
-
Repair
Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
-
Replacement Therapy
Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
-
Residual Stress
Simulation of the Effect of Sub-Micron Interface Roughness on the Stress Distribution in Functionally Graded Thermal Barrier Coatings [Volume 1, Issue 1, 2015, Pages 40-47]
-
Residual Stress
Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
-
Resistive switching
Investigation of resistive switching in anodized titanium dioxide thin films [Volume 2, Issue 3, 2016, Pages 34-37]
-
Response
Design and Study of the Photodetection Performance of Photodetector Based on CH3NH3PbBr3 Organic-Inorganic Hybrid [Volume 8, Issue 3, 2022, Pages 13-17]
-
Response Surface Methodology
Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
-
Reverse co
Reverse chemical co-precipitation: An effective method for synthesis of BiFeO3 nanoparticles [Volume 3, Issue 1, 2017, Pages 31-36]
-
Reverse Osmosis
Characterization and Performance Evaluation of Fabricated TFN-RO Membranes in the Presence of MFI Type Zeolite [Volume 8, Issue 2, 2022, Pages 12-26]
-
Rheological chracteristics
The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
-
Rheological properties
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Rheological property
Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
-
Rheology
Preparation of High-Solid Filled Alumina Inks for Stereolithography 3D Printing Process [Volume 7, Issue 2, 2021, Pages 23-27]
-
Rice husk
Green Synthesis of Silica Extracted from Rice Husk Ash [Volume 8, Issue 4, 2022, Pages 15-20]
-
Rubber Compound
Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
S
-
Safavid Era
Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
-
Samarium Oxide
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
Saturation magnetization
Studying the Effect of Calcination on the Optical and Magnetic Properties of NiFe2O4@ZnO:Ti Nanoparticles [Volume 8, Issue 3, 2022, Pages 1-7]
-
SBF
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Scaffold
Fabrication, Characterization and Process Parameters Optimization of Electrospun 58S Bioactive Glass Submicron Fibers [Volume 1, Issue 3, 2015, Pages 16-21]
-
Scaffold
Evaluation of mechanical properties and apatite formation of synthesized fluorapatite-hardystonite nanocomposite scaffolds [Volume 4, Issue 3-4, 2018, Pages 8-15]
-
Scaffolds
Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
-
Scan Rate
Cyclic Voltammetry Investigation of the Mechanism of CuInSe2 and CuIn(Al)Se2 Electrodeposition from Aqueous Solution [Volume 2, Issue 3, 2016, Pages 1-4]
-
Scientometric
Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
-
Scientometrics
The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
-
Scratch
Mechanical Properties of Electrophoretically Deposited 45S5 Bioglass-Graphene Oxide Composite Coatings [Volume 5, Issue 4, 2019, Pages 17-23]
-
Se
Fabrication and Structural Characterization of Se-Ge Chalcogenide Glasses by Means of Melt Quenching Technique [Volume 3, Issue 2, 2017, Pages 7-13]
-
Segregation
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
Self-compacting mortar (SCM)
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
-
SEM
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
SEM
The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
-
Semiconductor Glass
Comparison of Semiconducting Behavior and Optical Properties of Oxyfluoride Glasses of SiO2-Al2O3-BaF2 and SiO2-Al2O3-CaF2 Systems [Volume 6, Issue 2, 2020, Pages 1-6]
-
Si
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
Si3N4
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
-
SIC
Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
-
SIC
Modelling and Optimization of Densification and Hardness of Cu/SiC Nanocomposites based on Response Surface Methodology (RSM) [Volume 7, Issue 4, 2021, Pages 28-35]
-
SiC powder
The Effect of Binder Components and Powder to Binder Ratio on Rheological Properties of Mg-SiC Feedstocks [Volume 2, Issue 1, 2016, Pages 5-12]
-
SiC-TiC
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
-
SILAR process
Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
-
Silica
Hydroxyapatite/silica Nanopowders Deposition on Ti Substrate by Plasma Spray Method [Volume 3, Issue 4, 2017, Pages 21-24]
-
Silica
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Silica
Crude Oil Interfacial Tension Reduction and Reservoir Wettability Alteration with Graphite or Activated Carbon/Silica Nanohybrid Pickering Emulsions [Volume 6, Issue 1, 2020, Pages 30-35]
-
Silica-alumina membrane
An investigation on the effect of alumina on hydrothermal stability of nanostructured silica membrane prepared by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 23-35]
-
Silicon carbide
Investigation of the Physical and Mechanical Properties of Silicon Carbide Prepared on an Industrial Scale [Volume 5, Issue 4, 2019, Pages 1-6]
-
Silicon nanowires
Nanowires fine tunable fabrication by varying the concentration ratios, the etchant and the plating spices in metal-assisted chemical etching of silicon wafer. [Volume 3, Issue 2, 2017, Pages 38-44]
-
Silicon Pyramid
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
-
SILVACO
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
Simulated body fluid
In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
-
Simulated body fluide solution
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
Simulation
Study on appropriate and modified conditions for flash sintering process by simulation modeling [Volume 5, Issue 1, 2019, Pages 31-35]
-
Simulation
Two-Dimensional Physical and Numerical Modelling of Copper (II)-Oxide/Silicon Hetero Junction Bipolar Transistor [Volume 7, Issue 2, 2021, Pages 28-33]
-
Sintering
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
-
Sintering
Synthesis of MgTiO3 Powder Via Co-Precipitation Method and Investigation of Sintering Behavior [Volume 4, Issue 1, 2018, Pages 40-44]
-
Sintering
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
Sintering
Effect of Cristobalite Content on Physical, Dielectric Constant, and Bending Strength of Fused Silica Ceramics Formed by Slip Casting Method [Volume 7, Issue 2, 2021, Pages 16-22]
-
Sintering
The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
-
Sintering process
Effect of nano and micron WO3 on microstructure and electrical properties of lead free potassium sodium niobate piezoceramics [Volume 1, Issue 3, 2015, Pages 11-15]
-
SiO2 ceramic
Molecular Dynamics Simulation of Straight-chain Alkanes Adsorption and Diffusion in Zeolite [Volume 1, Issue 1, 2015, Pages 17-26]
-
Small polaron hopping
Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
-
Sn
Fabrication and Investigation of Se-Ge Glass-Ceramics in the Presence of Ga and Sn Additives [Volume 5, Issue 4, 2019, Pages 7-11]
-
Sodium
Lithium Substitution Glass Composition Used in Glass Ionomer Cement: Physiochemical Properties in Artificial Saliva [Volume 6, Issue 4, 2020, Pages 28-36]
-
SOFC
Investigation of crystallization and sinterability properties of BaO-Al2O3-SiO2 glass-ceramics containing K2O and B2O3 [Volume 1, Issue 3, 2015, Pages 1-10]
-
SOFC
The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
-
Solar Cell
Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
-
Solar Cell
Effects of particles size distribution and occupied area of CdS photosensitizer on photovoltaic performance [Volume 2, Issue 4, 2016, Pages 7-12]
-
Sol-Gel
Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
-
Sol-Gel
An investigation on the effect of acetone and DMF as solvent on synthesis of P2O5-CaO-Na2O-TiO2 glass powder by sol-gel method [Volume 4, Issue 3-4, 2018, Pages 43-49]
-
Sol-Gel
Characterization and Bioactivity of a Quaternary Phosphate-based Glass Powder Synthesized by Sol-Gel Method [Volume 5, Issue 2, 2019, Pages 6-11]
-
Sol-Gel
In Vitro Evaluation of Manganese-Containing Glass-Ceramic in Quaternary SiO2-CaO-Na2O-P2O5 System [Volume 9, Issue 1, 2023, Pages 8-14]
-
Sol-gel method
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
-
Solidification
Investigating The Role Of Pouring Temperature, Heat Treatment And Mold Preheating Temperature On The Hardness And Microstructure Of The Inner Surface Of Al-15Mg2Si In Situ Composite Pipe Fabricated By Centrifugal Casting Method. [(Articles in Press)]
-
Solid oxide fuel cells
Synthesis and Characterization of Barium Aluminosilicate Glass as the Sealant for Solid Oxide Fuel Cell Application [Volume 6, Issue 3, 2020, Pages 25-30]
-
Solid state
Effect of LiCl on the Microstructure and Luminescence Properties of YVO4:Eu3+ and YBO3:Eu3+ Phosphors [Volume 2, Issue 2, 2016, Pages 32-36]
-
Solid state
Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
-
Solid-State
Effect of NiO Sintering Aid on the Electrical Properties of KNN-LST Lead-free Piezoceramics [(Articles in Press)]
-
Solid State Reaction
The Effect of Europium Doping on the Structural and Magnetic Properties of GdMnO3 Multiferroic Ceramics [Volume 3, Issue 4, 2017, Pages 1-5]
-
Solvent
Investigating the Effect of Pigment and Solvent Components on the Physical Properties of Digital Ink for the Decoration of Ceramic Tiles [Volume 5, Issue 3, 2019, Pages 23-29]
-
Spark Plasma Sintering
In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
-
Spark Plasma Sintering
Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
-
Spark Plasma Sintering
Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
-
Spark Plasma Sintering
Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
-
Spark Plasma Sintering
Microstructure and Mechanical Properties of Spark Plasma Sintered Amorphous AlPO4 Ceramics [Volume 7, Issue 4, 2021, Pages 52-58]
-
Spark Plasma Sintering
Oxidation Behavior of HfB2-SiC-Nd2O3 Ultra-High Temperature Composite Sintered through SPS Process [Volume 8, Issue 2, 2022, Pages 1-11]
-
Spark Plasma Sintering
The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
-
Spark plasma sintering (SPS)
Fabrication of Nanostructured Cu matrix Nanocomposites by High Energy Mechanical Milling and Spark Plasma Sintering [Volume 1, Issue 3, 2015, Pages 39-43]
-
Spark plasma sintering (SPS)
Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
-
Spherical powders
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
-
Spinels
Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
-
Spin glass
Structual, Magnetic, and Transport Properties of LaMn1-xCuxO3 (x= 0-0.125) Ceramics [Volume 7, Issue 1, 2021, Pages 1-10]
-
SPS
Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
-
Sputtering
Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
-
Sputtering
Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
-
SS316L implant
Improvement of Austenitic Stainless Steel Implant via Dual Layer Coating of TaN-DLC Using Sputtering and PACVD Methods [(Articles in Press)]
-
Stability
Preparation, characterization and stability of Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic with NASICON-type structure [Volume 2, Issue 1, 2016, Pages 38-43]
-
Starch Consolidation
Fabrication and Characterization of Porous Silicon Nitride Bodies through Starch Consolidation Casting and Pressureless Sintering [Volume 5, Issue 2, 2019, Pages 32-38]
-
Steel
Phlogopite glass-ceramic coatings on stainless steel substrate by plasma spray [Volume 2, Issue 2, 2016, Pages 16-21]
-
Stöber method
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Stress and Strain
Investigation of the Impact of Graphene Nanostructure on the Mechanical Properties of Tires Compounds [Volume 8, Issue 4, 2022, Pages 42-47]
-
Structural properties
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
-
Superalloy
Optimization of Heat Treatment Cycles in Sub-atmospheric LiF-NaF-KF Based Fluoride Ion Cleaning for Removing Oxide Layers in Cracks of IN738-LC [Volume 7, Issue 1, 2021, Pages 18-24]
-
Superparamagnetic
Characterization and magnetic properties of CoFe2O4 nanoparticles synthesized under gas atmosphere: Effect of ferrofluid concentration on hyperthermia properties [Volume 9, Issue 2, 2023, Pages 45-52]
-
Surface analysis
ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
-
Surface modification
An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications [Volume 6, Issue 1, 2020, Pages 1-15]
-
Surface Texturing
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution [Volume 3, Issue 3, 2017, Pages 16-18]
-
Surfactants
Synthesis of CuO and CuO/ZnO Composite Powders for Antibacterial, Photocatalytic, and Pigment-Related Applications [Volume 8, Issue 1, 2022, Pages 1-8]
-
Synthesis
Electrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery [Volume 3, Issue 3, 2017, Pages 19-25]
-
Synthesis
The Effect of Temperature and Al as an Additive on the Synthesis, Structure, Densification, and Conductivity of Garnet-Type Li7La3Zr2O12 [Volume 9, Issue 2, 2023, Pages 16-23]
-
Synthesize
Crystal Structure and Lattice Parameter Investigation of La3+ Substituted CeO2 in LaxCe1-xO2-X/2 Synthesized by Solid-State Method [Volume 6, Issue 1, 2020, Pages 43-48]
T
-
Taguchi method
Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
-
Taguchi method
Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
-
Tantalum carbide
Spark Plasma Sintering of Ultra-High Temperature Tantalum/Hafnium Carbides Composite [Volume 2, Issue 1, 2016, Pages 13-18]
-
Tape casting
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
-
Tape casting
The Effect of Process Parameters on the Apparent Defects of Tape-Cast SOFC Half-Cell [Volume 5, Issue 4, 2019, Pages 12-16]
-
Targeted nucleic acid delivery
A Review on the Application of Nanoparticles for Targeted Gene Delivery [Volume 8, Issue 1, 2022, Pages 44-55]
-
Tellurite glass
Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
-
TEM
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
-
TEM
Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
-
Textural Properties
Preparation and Characterization of High Specific Surface Area γ-Alumina Nanoparticles Via Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 8-15]
-
The CAZO Thin Films
Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
-
Thermal annealing
Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
-
Thermal barrier coating
The Process of Scientometrics in the Field of Thermal Barrier Coatings as an Indicator of the Progress of Materials Engineering [Volume 9, Issue 1, 2023, Pages 1-7]
-
Thermal barrier coatings (TBCs)
A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
-
Thermal expansionc oefficient
Comparison of Thermal Expansion Coefficient in Ln0.6Sr0.4Co0.2M0.8O3-δ (Ln=La,Nd,Sm and M=Fe,Ni,Mn) as Cathode Materials for Solid Oxide Fuel Cell [Volume 1, Issue 1, 2015, Pages 27-31]
-
Thermal shock
Experimental and Numerical Study of the Thermo-Mechanical Behavior of Plasma-Sprayed Gadolinium and Yitria Zirconate-Based Thermal Barrier Coatings [Volume 7, Issue 4, 2021, Pages 36-51]
-
Thermal stability
Characterization and Stability Study of Polyurethane / Magnetic Strontium Hexaferrite / Clinoptilolite Nanocomposite [Volume 8, Issue 4, 2022, Pages 48-56]
-
Thin film
Investigation of Physical Properties of e-Beam Evaporated CdTe Thin Films for Photovoltaic Application [Volume 2, Issue 2, 2016, Pages 27-31]
-
Thin film
Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
-
Thixotropy
Rheological Study of Nickel Ferrite Ferrofluid [Volume 1, Issue 2, 2015, Pages 29-33]
-
Ti Alloy
Comparative Study of Anodized Titanium Surfaces: The Effect of Low Voltage on the Morphology, Performance, and Corrosion Resistance of the Double Layer [Volume 9, Issue 2, 2023, Pages 1-7]
-
TiB2
Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
-
TiC
Effect of Ni content on the reaction behaviors and microstructure of TiB2-TiC/Ni cermets synthesized by MASHS [Volume 2, Issue 2, 2016, Pages 22-26]
-
Ti containing hydroxyapatite
Titanium and Fluoride Co-substitution in Hydroxyl Apatite [Volume 1, Issue 2, 2015, Pages 18-23]
-
Ti-Cu alloy
Characterization of Flowability and Compaction Behavior of Biomedical Ti-Cu Intermetallic Alloy Synthesized by Mechanical Alloying Method [Volume 9, Issue 2, 2023, Pages 8-15]
-
Tiles
Characterization of Iranian Ancient Colored Glazed Ceramic Tiles of Safavid Era [Volume 8, Issue 1, 2022, Pages 27-35]
-
Tin Oxide
The Effect of Sm2O3 on the Sintering and Grain Growth Behaviors of SnO2-Based Ceramics [Volume 5, Issue 2, 2019, Pages 26-31]
-
TiO2
Preparation of Cr-doped TiO2 thin film by sonochemical/CVD method and its visible light photocatalytic activity for degradation of paraoxon [Volume 3, Issue 2, 2017, Pages 45-52]
-
TiO2
The Comparison of MgO and TiO2 Additives Role on Sintering Behavior and Microstructures of Reaction-Sintered Alumina-Zirconia-Mullite Composite [Volume 1, Issue 2, 2015, Pages 11-17]
-
TiO2
Kinetics of photocatalytic degradation of methylene blue on nanostructured TiO2 coatings created by sol-gel process [Volume 5, Issue 1, 2019, Pages 1-8]
-
TiO2
Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
-
TiO2
The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
-
TiO2
Preparation of Nanocomposite of TiO2 Nanoparticles and CuS Nanoflakes for Visible-Light Photocatalytic Decomposition of Nitenpyram Pesticide [Volume 8, Issue 3, 2022, Pages 22-28]
-
TiO2 nanoparticles
Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
-
TiO2 nanoparticles
Preparation and Characterization of TiO2 Nanoparticles Prepared by Sol-Gel Method [Volume 3, Issue 3, 2017, Pages 38-47]
-
TiO2 nanosphere
Aqueous Extract of Acanthophyllum laxiusculum Roots as a Renewable Resource for Green synthesis of nano-sized titanium dioxide using Sol-gel Method [Volume 2, Issue 1, 2016, Pages 26-31]
-
Tissue engineering
Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering [Volume 8, Issue 4, 2022, Pages 32-41]
-
Tissue Regeneration
Nanomaterials: Applications in Regeneration of Damaged Tissues [Volume 8, Issue 4, 2022, Pages 1-14]
-
Titanium
Tailoring Bioactivity and Corrosion Properties of Plasma Electrolytic Oxidized Titanium Using GO-Silane Particles [Volume 8, Issue 4, 2022, Pages 21-31]
-
Titanium diboride
Microstructure of spark plasma sintered TiB2 and TiB2–AlN ceramics [Volume 5, Issue 1, 2019, Pages 36-40]
-
Titanium dioxide
Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
-
Titanium nanotube
Pseudocapacitive Behavior of Nb2O5-TNTs Nanocomposite for Lithium-ion Micro-batteries [Volume 7, Issue 2, 2021, Pages 1-9]
-
Titanium substrates
Characterization and Corrosion Behavior of Hydroxyapatite- Coated Titanium Substrates Prepared Through Laser Induced Liquid Deposition Technique [Volume 1, Issue 3, 2015, Pages 28-33]
-
Topography
Studying the Optical Density, Topography, and Structural Properties of CZO and CAZO Thin Films at Different Annealing Temperatures [Volume 6, Issue 2, 2020, Pages 17-23]
-
Topography
Multi-Walled Carbon Nanotubes (MWCNTs) Synthesized on Ni-Cu NPs @ a-C: H Films: A Study of Cavity and Bearing Areas Percentage, ZX Topography, and the Width of the Surface Height Distribution with Different Ni Layers’ Thickness [Volume 7, Issue 4, 2021, Pages 20-27]
-
Toughness
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
-
Toughness mechanisms
The Effect of TiC Additive with Al2O3-Y2O3 on the Microstructure and Mechanical Properties of SiC Matrix Composites [Volume 6, Issue 3, 2020, Pages 15-24]
-
Tragacanth
An investigation on injectable composites fabricated by 45S5 bioactive glass and gum tragacanth: Rheological properties and in vitro behavior [Volume 4, Issue 2, 2018, Pages 16-26]
-
Tragacanth
Evaluating the Effect of the Constituent Content on the Mechanical and Biological Properties of Gelatin/Tragacanth/Nano-Hydroxyapatite Scaffolds [Volume 8, Issue 1, 2022, Pages 18-26]
-
Transparent Ceramic
In-situ Fabrication of Transparent Magnesium Aluminate Spinel by Spark Plasma Sintering [Volume 3, Issue 1, 2017, Pages 6-9]
-
Two Steps
The Effect of Microwave Settings on HAp Sintering [Volume 8, Issue 3, 2022, Pages 18-21]
U
-
Ultra-High Temperature Ceramic (UHTC) Oxidation Behavior
Oxidation Behavior of Spark Plasma Sintered HfB2-SiC-Graphite Composite at 1400 °C [Volume 8, Issue 1, 2022, Pages 9-17]
-
Ultra-low cement
The optimization of dispersant content in alumina castable containing nano-titania [Volume 4, Issue 3-4, 2018, Pages 16-22]
-
Ultrasound
Investigating the Effect of Ultrasonification Time on Transition from Monolithic Porous Network to Size-Tunable Monodispersed Silica Nanosphere in Stöber Method [Volume 4, Issue 2, 2018, Pages 37-43]
-
Ultraviolet detector
Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
-
Urbach tailing
The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
-
UV visible
Luminescence Properties of TeO2-LiF-Gd2O3 Glasses [Volume 1, Issue 2, 2015, Pages 1-5]
V
-
Viscosity
Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
-
Vitro Biocompatibility
In Vitro behavior of mechanically activated nanosized Si-Mg-doped fluorapatite [Volume 2, Issue 3, 2016, Pages 5-11]
-
VOSviewer
Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
W
-
Waste ceramic powder (WCP)
Mechanical Strength, Durability, and Environmental Properties of Ternary Blended Self-Compacting Cementitious Mortar Containing Class F Fly Ash and Waste Ceramic Powder [Volume 8, Issue 2, 2022, Pages 34-52]
-
Waste Management
Waste Management of Building Ceramic Materials Using the DfD Technique: Sustainable Development and Environmentally Friendly [Volume 4, Issue 1, 2018, Pages 1-11]
-
WC
The Effect of Rotation Speed on the Microstructure and Hardness of Synthesized Al-WC Nano-Composite by Centrifugal Casting [Volume 2, Issue 4, 2016, Pages 1-6]
-
WC
Effect of Surface Roughness Morphology on Bond Strength of Thermal Sprayed WC-10Co-4Cr Ceramic/Metal Coating [Volume 2, Issue 4, 2016, Pages 39-43]
-
WC-Co
Effect of Carbide Particle Size on the Microstructure, Mechanical properties, and Wear Behavior of HVOF-sprayed WC-17% Co Coatings [Volume 6, Issue 3, 2020, Pages 1-14]
-
WC–Co
Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
-
WC–FeCrAl
Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
-
WC–NiMoCrFeCo
Investigating the Abrasive Wear Resistance of Thermal-Sprayed WC-Based Coatings [Volume 6, Issue 2, 2020, Pages 7-16]
-
Wear
Wear Behavior in Micro and Nano-Structured WC-9Co-0.7VC Cemented Carbide Produced by Rapid Hot Press Sintering [Volume 1, Issue 2, 2015, Pages 34-39]
-
Wear
Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
-
Wear
Dry and Wet Wear Characteristic of TiO2 Thin Film Prepared by Magnetic Sputtering in Ringer Solution [Volume 5, Issue 4, 2019, Pages 30-37]
-
Wear rate
The Role of Diamond on Wear Properties of WC-Co Composite [(Articles in Press)]
-
Wet-chemical method
A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
-
WO3
Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
-
WO3.H2O
Microwave-Assisted Solution Combustion Synthesis of WO3 Nanoparticles: Optical and Colorimetric Characteristics [Volume 5, Issue 3, 2019, Pages 36-46]
-
WO3 nanoparticles
Affectability of Low Frequency Electrophoretically Deposited Patterns of WO3 and TiO2 Nanoparicles in the Presence of Modifier [Volume 1, Issue 1, 2015, Pages 32-35]
-
WO3-rGO
Identification of Intermediate Compound in Photodegradation of 1-Naphthol by WO3-rGO Nanocomposites [Volume 5, Issue 2, 2019, Pages 1-5]
-
Wollastonite
In vitro evaluation of apatite/wollastonite glass–ceramic nano biocoatings on 316 alloys by plasma-sprayed [Volume 1, Issue 3, 2015, Pages 34-38]
X
-
X
Determination of cristobalite phase content in ceramic cores using various X-ray quantitative phase analysis methods [Volume 3, Issue 2, 2017, Pages 1-6]
-
X-ray diffraction
Microhardness Optimization of Al–TiC Nanocomposite Produced by Mechanical Milling and Heat Treatment [Volume 7, Issue 1, 2021, Pages 35-45]
-
XRD
Characterization of Structural, Optical and Hydrophilicity properties of TiO2 Nano-Powder Synthesized by Sol-Gel Method [Volume 2, Issue 2, 2016, Pages 1-6]
Y
-
Y
Microstructure and Magnetic Properties of Sr2Co1.7Mg0.3Fe11.2 Hexaferrite Synthesized by Auto-Combustion Sol-Gel Method [Volume 1, Issue 3, 2015, Pages 22-27]
-
Y2O3 dopant
The Crystallization Effect on the Optical Properties of Oxyfluoride Glass-Ceramics Containing CaF2 Nanocrystals Doped with Y3+ Ions [Volume 5, Issue 3, 2019, Pages 1-7]
-
Y3Al5O12 - MgAl2O4 Spinel
Reactive Spark Plasma Sintering of Y3Al5O12-MgAl2O4 Composites [Volume 7, Issue 3, 2021, Pages 49-55]
-
YAG: Cr
Preparation and Characterization of Y3Al5O12: Cr3+ Nanophosphor by Electrochemical Technique [Volume 6, Issue 2, 2020, Pages 30-34]
-
YSZ
Characterization and Phase Transformation of Spherical YSZ Powders Fabricated Via air Plasma Spray Method [Volume 2, Issue 4, 2016, Pages 32-38]
-
YSZ suspension
Dispersion Properties of Nano YSZ Particles in Aqueous Suspensions [Volume 5, Issue 3, 2019, Pages 15-22]
-
YSZ : ZrO2-8 wt. % Y2O3
A Comparative Study on the Phase Stability of ZrO2-8 wt. % Y2O3 : Nano- and Micro-Particles [Volume 8, Issue 2, 2022, Pages 53-60]
-
Yttria stabilized zirconia (YSZ)
Effect of NiTi Addition on the Wear Resistance of YSZ Coatings [Volume 3, Issue 3, 2017, Pages 32-37]
-
Yttrium aluminum garnet
Cathodic Electrodeposition and Characterization of YAG Nanostructure: Effect Current Density on the Morphology [Volume 4, Issue 2, 2018, Pages 32-36]
Z
-
Ziconia
Investigation of the mechanical properties of various yttria stabilized zirconia based thin films prepared by aqueous tape casting [Volume 3, Issue 1, 2017, Pages 26-30]
-
Zircon
The Effect of Zircon on Long-Time Corrosion Resistance of Alumina [Volume 3, Issue 4, 2017, Pages 41-48]
-
Zirconia
Investigating the Process of Producing Scientific Clinical Research about Zirconia Implants: A Bibliometric Visual Mapping Approach [Volume 9, Issue 1, 2023, Pages 46-53]
-
Zirconia nanoparticles
Effect of CaO on the Formation of PSZ and γ-Zirconia Nanoparticles through Ball Milling [Volume 1, Issue 2, 2015, Pages 40-44]
-
Zirconium
Effect of surface roughness on coating SiO2-P2O5-CaO-ZrO2 upon Zirconium by Sol-Gel Method [Volume 3, Issue 1, 2017, Pages 21-25]
-
Zirconium Oxide
Electrodeposited Hydroxyapatite/Graphene Oxide/Zirconia Oxide Composite Coatings: Characterization and Antibacterial Activity [Volume 6, Issue 4, 2020, Pages 8-14]
-
Zn content
ZnxCo3-xO4 Hydrothermally Mesoporous Nanoparticles (ZCH): Structure, Optical, and Surface Analysis [Volume 9, Issue 1, 2023, Pages 28-37]
-
ZnO
Enhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates [Volume 2, Issue 1, 2016, Pages 19-25]
-
ZnO
Luminescence Investigation of Ce Doped ZnO/CdWO4 Nanocomposite [Volume 8, Issue 3, 2022, Pages 8-12]
-
ZnO thin films
Ultraviolet Detectors Based on Annealed Zinc Oxide Thin Films: Epitaxial Growth and Physical Characterizations [Volume 5, Issue 4, 2019, Pages 24-29]
-
ZnS
Effect of the Sulfur Concentration on the Optical Band Gap Energy and Urbach Tail of Spray-Deposited ZnS Films [Volume 3, Issue 4, 2017, Pages 6-12]
-
ZnWO4
Construction of 0D/3D ZnWO4-MoS2 heterojunction with enhanced charge carrier separation for decomposition of organic pollutants under visible light irradiation [(Articles in Press)]
-
ZrB2-30 vol% SiC
Effect of Microstructure, Chemical Composition, and Open Porosity on Oxidation Resistance of ZrB2-Based Composites [Volume 6, Issue 4, 2020, Pages 37-44]
-
ZrB2-SiC
Oxidation of ZrB2-SiC Composites at 1600 °C: Effect of Carbides, Borides, Silicides, and Chopped Carbon Fiber [Volume 4, Issue 1, 2018, Pages 18-23]
-
ZrB2-SiC composites
Investigation of Effective Parameters on Densification of ZrB2-SiC Based Composites Using Taguchi Method [Volume 2, Issue 2, 2016, Pages 7-15]
-
ZrO2
The Impact of Current Density of Electroplating on Microstructure and Mechanical Properties of Ni-ZrO2-TiO2 Composite Coating [Volume 6, Issue 1, 2020, Pages 22-29]
-
Z-X topography
Cu/Co Bilayers: Study of the Surface Topography, Optical Dispersion Parameters, and Transitions of Carriers [Volume 8, Issue 3, 2022, Pages 29-38]
Your query does not match with any item